Versacut 4.0 Amp Mini-Circular Saw is rated out of 5 by 244.
Rated 5 out of 5 by GuitarMan from A great plunge cut capable mini circular saw I have owned and used my Versacut for a little under a year and a half and it along with my BladeRunner X2 saw has proven to be one of the most important tools I own. I know some say it cannot replace a 7-1/4 inch circular saw because it cannot cut 2 x 4s, but try safely plunge cutting into a shed roof with a standard 7-1/4 inch circular saw without damaging the rafters and studs and without kickback. The ability to easily make plunge cuts even in the middle of stock is great. Also, it will cut sheets of plywood, trim boards, etc. which make up the typical stock sizes I deal with. The assortment of blades it comes with is also very handy. I was finishing a tile countertop when my tile saw stopped working. Fortunately I had my Versacut with me which allowed me to finish the job by using the dry cut tile blade that came with it. Also, I really like the fact that it weighs less than half the weight of my 7 1/4 inch circular saw. This, along with my cordless drill, hammer, level and BladeRunner X2 is a tool I always carry with me.
Date published: 2019-11-24
Rated 5 out of 5 by Tom3843 from Perfect tool For The Job My DYI home project required replacing approximately 200 solid vinyl soffits with vented vinyl soffits. Perfect saw for the job, easier to use and more accurate cuts than using my larger saw.
Date published: 2019-08-02
Rated 5 out of 5 by Dave the carpenter from Great design I am a contractor and have 2 of these at my disposal. Have been cutting hardy/concrete board with the vacuum attachment for over 6years. Tool never failed. Noticed you have to use vacuum attachment on tool for straight cuts in plywood. Can't wait for new version of tool.
Date published: 2019-06-07
Rated 5 out of 5 by Scott1954 from Best saw ever ! I've had mine for seven years, This is one tool I do not loan, I like it the way it is and rarely do borrowed tools come back the same way they went out. Best all around saw ever. I always have it in my tool bag. Sadly my spindle clamping screw sheared; where can I find a replacement?
Date published: 2019-02-09
Rated 5 out of 5 by Charity7921 from Great little work horse. I have had one for seven years and it is my go to saw. The one saw that others like to borrow and the one tool I have to make sure it is returned. It is powerful, compact and easily fits in my tool bucket to go to the next project.
Date published: 2018-11-10
Rated 5 out of 5 by ronnie ola from I need to replace a part of mine and can't contact where at.
Date published: 2018-11-02
Rated 5 out of 5 by DonH47 from Great small saw. Have had this for a while and recently used this to modify my son's island. This small saw did so many things well, even though it will only cut 1 1/16" thick material.
Date published: 2018-10-04
Rated 5 out of 5 by BlueMax from My favorite saw I bought this as a gift. I have had one for 4 years and love it.
Date published: 2018-03-01
Can you use this saw on its side, as an undercut saw, to trim door bottoms without removing the doors?
No, depth of cut is 1 1/16”, doors are 1 ⅜”, unless you cut from both sides
Date published: 2019-03-04
What diameter is the arbor? What diameter is the blade?
Hi Can I used by power supply of 120v 50 hz ?
Thank you for your question. The voltage of the Rockwell Versacut is 120V-60Hz.
Date published: 2018-10-15