BladeRunner X2 Crosscut Sled Attachment

Model # RW9266
$29.99

Availability: In stock

Ships for free
GET DETAILS
OR
  • Easily attaches directly onto your Rockwell BladeRunner X2 without the need for tools for precise crosscuts
  • Fully supports your material throughout each cut
  • Features an integrated, easy-to-read scale for accurate measurements
  • Holds your material completely still & perfectly square for an exact 90° cut
30 Day Guarantee

Key Features

For even more accuracy and precision, the BladeRunner X2 Crosscut Sled Attachment from Rockwell is the BladeRunner accessory you need. It’s easily attached to the Rockwell BladeRunner model to ensure your materials are fully supported as you cut. When you need to achieve that exact 90° cut, the Rockwell BladeRunner X2 attachment keeps your material completely secure.

The Crosscut Sled Attachment for the Rockwell BladeRunner includes an integrated scale for the most accurate measurements. You’ll never suffer from an imprecise crosscut again. This blade runner accessory from Rockwell means every cut you make is as accurate, precise, and as safe as possible.

IMPORTANT INFORMATION

Important Information

California proposition 65 WARNING:

This product can expose you to chemicals including lead, phthalate or bisphenol A which are known to the State of California to cause cancer, birth defects or other reproductive harm. Wash your hands after use. For more information go to www.P65Warnings.ca.gov.

Proposition 65 de la Californie AVERTISSEMENT:

Ce produit peut vous exposer à des produits chimiques, incluant au plomb, au phtalate ou au bisphénol A, qui sont reconnus dans l'État de Californie comme pouvant causer un cancer, des anomalies congénitales ou d'autres dommages à l'appareil reproducteur. Assures-vous de bien vous laver les mains après usage. Pour en savoir plus, veuillez consulter le site www.P65Warnings.ca.gov.

Propuesta de California 65 ADVERTENCIA:

Este producto puede exponerlo a químicos que incluyen plomo, ftalato, o bisfenol A que se sabe en el Estado de California que causan cáncer, defectos de nacimiento u otros daños reproductivos. Lave sus manos después de usarlo. Para más información visite www.P65Warnings.ca.gov.
BladeRunner X2 Crosscut Sled Attachment is rated 4.4 out of 5 by 110.
Rated 5 out of 5 by from IMHO a must have if you own a BladeRunner X2 I own two BladeRunner X2s and purchased two of these Crosscut Sleds for them a little under a year and a half ago. The sleds make cross cutting much more accurate. They do have a little play in the tracks they slot into on the BladeRunner X2, but they do allow you to make good crosscuts. Also they are designed so they stop at the end of the cut without the blade coming into contact with the sled, so you do not have to worry about cutting into the sled, which really speeds up the process if you have to make multiple crosscuts of the same size, because you do not have to slow down at the end of the cut.
Date published: 2019-11-25
Rated 5 out of 5 by from Just what I needed I just received my crosscut sled and once I put to use I wondered why I waited so long to buy it. I don't own a table saw so I have been using my BladeRunner for all of my crosscuts. In the past I would typically use my my miter gauge for all of my cuts and as you might expect I would often need to re-cut the piece when my cut wasn't straight. Not any more! The crosscut sled makes a perfectly straight cut EVERY time. Thank you Rockwell!
Date published: 2019-04-27
Rated 5 out of 5 by from Not perfect but really close to my expectation The fact that I had to cut my slide before I could install it is annoying. You made this for my X2 you need to make it fit without the tab needing to be cut. Granted, extremely minor detail but c'mon, you made this for X2. Other than that, the price is somewhat fair considering all the markups on the way to my X2. When it is below $20 (look for sale) it is right where it should be. This is a $20 plastic slide that works perfectly with my X2. It has a little play but it well within tolerance of what I expected for $20. 5 stars for meeting my expectations, even if you made me hurt it in order to install it (just a very small tab but still).
Date published: 2018-05-25
Rated 5 out of 5 by from Safety Besides streight cutting it is an excelleng safety device for my BladeRunner X2.
Date published: 2018-04-24
Rated 5 out of 5 by from Easy to use, seems accurate. I like the crosscut sled. It allows me to make square ends and cut consistent lengths using the built in rulers or with a stop block. It would be cool if it had a storage spot built into the wall holder or saw itself.
Date published: 2018-01-17
Rated 5 out of 5 by from A home run! I bought this to use with the Bladerunner I bought last year for a flooring project. First time I have used them and it has performed outstandingly!
Date published: 2018-01-02
Rated 5 out of 5 by from Great addition. I had the original BladeRunner and purchased the newer version when it came out. I was ordering some other items and saw the sled. This thing is great. I can't believe how much I used it over the last month. It's well worth it.
Date published: 2018-01-02
Rated 5 out of 5 by from Wonderful Christmas present I purchased the Crosscut Sled along with the BladeRunner itself to give as a Christmas gift. I have not used it yet (although I plan to use it someday) but I have heard reports back from the reciepient that I have "knocked his sox off". So, it looks like Mission Accomplished. Maybe he will get busy and finish his Eagle Scout award now. (No pressure, Jason ... )
Date published: 2017-12-28
  • y_2019, m_12, d_14, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasreviews, tv_5, tr_105
  • loc_en_US, sid_RW9266, prod, sort_[SortEntry(order=RATING, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_rockwelltools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 69.97ms
  • REVIEWS, PRODUCT

How to attach for x2? Piece of plastic is blocking usage. The tab has no indicators to be removed & if doing so does that alter the warranty. How would you remove without breaking whole thing?

Asked by: Lorikelli
There is a review posted above where the guy said that he had to remove tag by cutting before he could install word on his x2. Hope this helps.
Answered by: cjhollar
Date published: 2019-12-07

I have the original Blade Runner, will the sled fit?

Asked by: Docs1948

I assume you have to cut the front connecting tab on my slide before I can install it ?

Asked by: jjaw25
I have the same question. Access to the blade release is impossible without cutting the tab. I called customer service, and they didn't;t know. Can't believe we are the first to ask this question; and, there is NO guidance in the paperwork. Common Rockwell think like you are a customer.
Answered by: Sled Installation
Date published: 2019-02-19

Will it work with my old bladerunner ?

Asked by: jew001
  • y_2019, m_12, d_14, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_4
  • loc_en_US, sid_RW9266, prod, sort_[SortEntry(order=HAS_STAFF_ANSWERS, direction=DESCENDING)]
  • clientName_rockwelltools
  • bvseo_sdk, p_sdk, 3.2.1
  • CLOUD, getContent, 20.94ms
  • QUESTIONS, PRODUCT