Rockwell Universal Fit Perforated Sanding Pad Set 2-Pack is rated out of 5 by 12.
Rated 5 out of 5 by DogFishMan from Good price Good price for two. The design is good but would be better if the metal plate was back on a 45' angle to the hook and loop pad.
Date published: 2016-02-08
Rated 5 out of 5 by Nolan from Worked Great! The pads were the correct ones. Nice to receive the correct product from a phone explanation of what you needed.
Date published: 2014-10-23
Rated 5 out of 5 by GMike from Multi Packs Are Great! After using my brand new Sonicrafter F50 for a few projects including sanding, I needed a new sanding pad. After shopping online and in my local stores I discovered that Rockwell offers 2 packs and at prices that are much better than online. I made sure to order a few so that I wouldn't run out too soon. Thank you Rockwell!
Date published: 2014-10-21
Rated 4 out of 5 by PAC1 from Well made These sanding pads work very well. I do, however, sometimes miss the lower profile of the older pad that came with my tool.
Date published: 2016-03-28
Rated 3 out of 5 by Rammrod from Don't apply too much pressure on sanding pads! I had rust to remove from steel square tubing. Using #40 sandpaper, I figured no big deal to cut down through the rust. All went fine at first until the triangle of sandpaper fell off because the sanding pack's holders (hooks?) disappeared, apparently from melting. I was applying extra firm pressure, because I thought the Sonicrafter could take it. The Sonicrafter did fine, but not the sanding pad. In the future, I'll lighten up, take more time, and have several sanding pads on hand. (They work fine on wood.)
Date published: 2015-11-16
Rated 2 out of 5 by FloorRestore from Wears out too fast! We use these professionally to detail the corner of hardwood flooring when refinishing them and they melt off in about 3 corners. We use them on the F50 Oscillator, which completely annihilates everything standing in its way. What we usually do is re-glue real Velcro to the pad once factory stuff melts down. This "new age" industrial strength melts way too quickly and putting standard Velcro on it helps extend the life much longer. When re-gluing it we use Gorilla glue. TO BE FARE THIS JUST ISN'T A ROCKWELL PROBLEM, WE'VE USED EVERY BRAND ON THE MARKET AND THEY ALL DO THIS.
Date published: 2015-11-02
Rated 1 out of 5 by Lori from Do not last at all I and my neighbor each purchased a Sonicrafter in the past 6 months. We have now gone through 4 of the sanding pad attachments. The sandpaper will not stick toe the attachment as the edges get rubbed done very quickly with use. I just purchased 2 more of these today. We love our Sonicrafters, just feel the quality of this attachment is inferior.
Date published: 2016-09-06
Rated 1 out of 5 by Djl1 from Cheap Velcro When sanding at a low or med speed the sandpaper isn't even wore out before the Velcro wears out. What a waste of money.
Date published: 2016-09-02